Corsa-Tigra.de

Hi opel friends,got from ebay,de some bonnet lifters but not be able to fit them....any ideas how to,because tried to go with the diagram but the one bolt that holds the bonnet hits the lifter

any one that can help me?

Hi!

Old topic... there are no Plug&Play fitting lifters for the Tigra.
maybe you can try to fix it with a small piece of steelplate.

...or maybe just open a threat with "Haubenlifter" i dont thing much guys here now what "bonnet lifters" are.

mfg. Flo

The Alchemist hat geschrieben: ...or maybe just open a threat with "Haubenlifter" i dont thing much guys here now what "bonnet lifters" are.

I have edited the Topic title, perhaps you have more success now

Greetz Pic

thats from another tread about bonntetlifter... i did this little pic-how-to to show how it works for my bonnet.

ps.
green circle, Die Schraube muss raus = you have to put out this screw
blue circle, Dämpfer festmachen = fix the new screws just here

pps.
white text, Dämpfer sorum einbauen = the shocks have to be mount like on the pic, the thick end up and the thin one down.

cant see the pictures

OK now i can see them,i ll try that.thanks again!!!

The Alchemist hat geschrieben:Hi!

Old topic... there are no Plug&Play fitting lifters for the Tigra.
maybe you can try to fix it with a small piece of steelplate.

...or maybe just open a threat with "Haubenlifter" i dont thing much guys here now what "bonnet lifters" are.

mfg. Flo

Try to do it today but didnt work
i take off the bolt in the green circle but nothing
the lifter hits the first bolt ( top blue circle on the picture)
(maybe you can try to fix it with a small piece of steelplate.)
Which piece of metal should i remove?

did u put the lifterscrew at the top of the bonnet holder???
thats wrong... it is the screw below and u have to remove the old first. after that screw the new one there and the other one at the blue circle at the fender.
u dont need to remove something u have to plug a peace of metal like a 3mm thick alu band at the bonnetscrew. thats all...

I fitted them on the lower bolt,gonna try to "space them" with 3mm or so and see ho it goes....
Thanks again